WPC Guest Technology Documentation

Use this guide to run Mackey Hall video and audio for a meeting, class, presentation, or event. If you are not sure where to start, follow the quick start checklist first, then open the guide for the specific equipment you need.

Quick Start

1. Turn on the sound system if you need microphones, computer audio, or Bluetooth audio.
2. Lower the projector screen if the projector will be used.
3. Turn on the projector or rear TV.
4. Connect your device and select the matching video input.
5. Use the iPad audio controls to choose the right preset and unmute the channels you need.
6. Test both picture and sound before the event begins.

Choose What You Need

Need	Start Here
Show a laptop, Church PC, or other video source	Computer Input Methods
Lower or raise the projector screen	Lowering Projector Screen or Retracting Projector Screen
Turn the projector or rear TV on or off	Turning Projector / Rear TV On or Turning Projector / Rear TV Off
Use microphones	Connecting and Using Microphones
Play sound from a computer	Using Computer Audio
Play sound from a phone, tablet, or laptop over Bluetooth	Bluetooth Pairing
Adjust volume, presets, or muted channels	Using Audio Controls

Shutdown Checklist

1. Turn off the projector or rear TV.
2. Retract the projector screen if it was lowered.
3. Mute or lower audio channels on the iPad if needed.
4. Disconnect personal devices and return cables, microphones, and the iPad to their normal locations.

Full Guide List

Video

1. Lowering Projector Screen
2. Retracting Projector Screen
3. Turning Projector / Rear TV On
4. Turning Projector / Rear TV Off
5. Computer Input Methods

Audio

1. Turning the Sound System On
2. Using Audio Controls
3. Using Computer Audio
4. Bluetooth Pairing
5. Connecting and Using Microphones